Cross strut mounting kit

Cross strut mounting kit for manhole covers DN 600

The installation set consists of the mounting bracket for the radar sensor and the cross strut for installation in a DN 600 manhole cover;

The stainless steel mounting bracket is designed so that the sensor can be optimally aligned. The swivel arm allows the sensor to be positioned above the level to be measured. The precise alignment of the sensor is then carried out via a ball joint.

Cross strut mounting

Suitable for DN 600 manhole covers with pockets for dirt traps.

  • Attach the swivel arm to the cross strut
  • Insert the cross strut into the manhole cover so that both hooks engage in the pockets for the dirt trap

 

A more detailed description can be found here.

You are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.

More Information

You are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.

More Information

Alignment of the radar sensor

By means of an adapter (optional accessory), a laser distance meter can be attached directly to the sensor holder. The adapter fits either in the 1.5″ holder of the sensor (precise alignment of the measuring point) or. on an additional mounting device on the bracket (measurement of the the mounting height with the sensor already mounted and aligned ).
The adapter is compatible with the following laser rangefinders:

  • Bosch GLM 30
  • Bosch GLM 40
  • Bosch GLM 50 C

 

Delivery

  • 1x sensor holder consisting of
    – 140 mm swivel arm
    – Sensor holder incl. ball joint
    – Clamping screws
  • 1x cross strut

 

The cross strut mounting kit now even better

The video shows the current, improved version of the cross strut mounting kit.

  • The wall thickness of the swivel arm has been increased
  • The clamping screws are secured with safety straps
  • The swivel arm can be adjusted in 15° increments
  • The flange is now symmetrical

You are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.

More Information

Product configurator

You can use the runtime calculator to estimate both the autonomous runtime of the application and the associated costs. Actual costs and energy consumption depend on measurement conditions such as reception quality and ambient temperature. You can find detailed information on the tariffs here.

Technical data

Cross strut mounting kit
Item no. 301484
Material Stainless steel V2A
Weight 1,4 kg
Length of the swivel arm 140 mm
Product Document Category Revision Hardware Version
Radar cross strut mounting kit 3D View Hw 2.0 from Hw 2.0
Radar cross strut mounting kit Installation Guide 02 from Hw 2.0

Which use case would you like to implement?

You are currently viewing a placeholder content from HubSpot. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.

More Information

In order to use our live chat, you must agree to the loading of Hubspot cookies. You can find out more about this in our privacy policy.