myDatalogEASY IoTmini

Compact control centre for self-sufficient field use

The myDatalogEASY IoTmini is a compact device for measuring, recording and transferring data in the field. The overall solution reduces the complexity of the measurement and control system in the field. There are various mounting options for mounting the device – wall, pipe or DIN rail mounting.

The “4-channel data logger” application for configuring the settings is pre-installed as standard; Further applications are available and customised programming is possible in the studio;

The myDatalogEASY IoTmini is available with different supply options. In addition to battery and accumulator operation, supply via a solar panel is possible for self-sufficient operation of the solution. By means of MPP (Maximum Power Point) tracker, the ideal operating point of the PV module is determined regardless of the size of the solar panel used. This means that the optimum charging power is always achieved. For applications with existing infrastructure, there is a power supply variant. For this, an alternative version of the cover is required.

Autarchic operation

The myDatalogEASY IoTmini is available with different supply options. In addition to battery and accumulator operation, supply via a solar panel is possible for self-sufficient operation of the solution. By means of MPP (Maximum Power Point) tracker, the ideal operating point of the PV module is determined regardless of the size of the solar panel used. This means that the optimum charging power is always achieved. For applications with existing infrastructure, there is a power supply variant. For this, an alternative version of the cover is required.

myDatalogEASY IoTmini in the pipe

Integrated sensor supply

The myDatalogEASY IoTmini can supply sensors with 5-24V. In addition, two switchable 3.3V sensor supplies are available.

integrated sensor supply - myDatalogEASY IoTmini

Integrated energy management

The myDatalogEASY IoTmini calculates the exact battery/accumulator state of charge using the coulomb method. This is particularly relevant for self-sufficient applications in the field and gives a good feeling.

rapidM2M Studio Boot Camp

IoT Platform & Studio

The fully integrated IoT platform offers countless features in running and scaling your application. Create your application in the integrated development environment Studio with the help of libraries and practical examples.

Machland Dam & Inteso

Monitoring of the flood protection system

At the 36-kilometre-long Machland Dam, the groundwater level is monitored remotely. Thanks to the monitoring system, the level can be queried from the control centre. When a limit value is exceeded, there is an automatic alarm.

YouTube

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

YouTube

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

UTK – EcoSens GmbH Zeitz

Monitoring photovoltaic systems

Photovoltaic systems are monitored throughout Germany. In the event of a fault, a quick, automatic alarm provides information.

Product configurator

With the help of the runtime calculator, you can estimate the autonomous runtime of the application as well as the costs incurred. The actual costs and energy consumption depend on the measurement conditions, such as the reception quality and ambient temperature. Detailed information on the tariffs can be found here.

Technical data

myDatalogEASY IoTmini
Item no. 301201 2G/M1/NB1 World
Inputs 4 x analogue or digital
and
4x remote sensors (feature activation)
Input configuration
  • 0...20mA / 4...20mA
  • 0...2V / 0...10V
  • PWM
  • Frequency
  • Digital / Counter
Measuring range / resolution
  • 0...20mA / 4...20mA: 6.3μA, load 96R
  • 0...2V: 610μV
  • 0...10V: 7.97mV
  • PWM: 100Hz
  • Frequency: 1kHz
  • Digital: 100ms
  • Counter: 1ms
Sensor supply
  • 2 x switchable 3.3V supply (max. 180mA )
  • 1 x switchable and from 1 second adjustable sensor supply range 5...24V
Temperature sensor Input 1x PT100/1000
Internal sensors and measured values
  • Input voltage
  • SOC (state of charge)
  • Battery life in days
  • Mobile strength
  • Humidity and temperature in the device
Serial interfaces, bus interfaces
  • 1x RS232 (feature activation)
  • 1 x RS485 (feature activation)
Outputs 1x potential-free switching contact
Power supply
  • Battery or rechargeable battery
  • PV or direct supply from 9...32VDC
  • PSU supply concept
Battery life time Battery life up to 5 years
Rechargeable battery life up to 2 years
Protection class IP66
Display RGB-LED
Dimensions 86 x 175 x 64mm (without antenna)
Data transmission 2G/M1/NB1 World
Name Hardware Version Document Category Revision
Fact Sheet myDatalogEASY IoTmini 2G/M1/NB1 World from Hw 1.1 Fact Sheet 01
Manual myDatalogEASY IoTmini from Hw 1.1 Manual 02
EU Declaration of Conformity myDatalogEASY IoT/IoTmini 2G/M1/NB1 World from Hw 1.0
from Hw 1.1
EU Declaration of Conformity 19.06.2023
3D View myDatalogEASY IoTmini from Hw 1.1 3D View Hw 1.1

Product variations

ProducttitlemyDatalogEASY IoTmini
Item no. myDatalogEASY-mini
Power supply Battery, rechargeable battery or direct power supply
Data memory 3MB internal flash memory
Programming In Studio with C-like scripting language built on PAWN
Dimensions 86 x 175 x 64mm (without antenna)
Protection class IP68 (plugged) / IP66 (unplugged)
Operating temperature -20...+60°C
Inputs

4 x analogue or digital

  • 0...20mA / 4...20mA
  • 0...2V / 0...10V
  • PWM
  • Frequency
  • Digital / Counter

Measurement range
  • 0...20mA / 4...20mA: 6,3µA
  • 0...2V: 610µV
  • 0...10V: 7,97mV
Temperature sensor 1 x PT100/1000 with auto detection(Additional costs will be incurred to release these features.)
Outputs

1x isolated switch contact

2 x switchable 3,3V supply (max. 180mA )

1 x switchable and adjustable sensor supply (5...24V )

Serial interfaces

1 x RS232 (optional)

1 x RS485 (optional)

Data transmission

  • 2G/M1/NB1 World

SIM
  • integrated SIM chip
  • external SIM interface
Positioning
  • by using GSM cell location
  • by using optionally available GNSS receiver
base price-
  

Do you want more infos about myDatalogEASY IoTmini?

Stefan Pfeffer

Receive your personalised offer

Please use the following form to let us know your requirements. 
We will be happy to provide you with a non-binding offer for your customised device. 
Please note that we only work with B2B customers. 

In order to use our live chat, you must agree to the loading of Hubspot cookies. You can find out more about this in our privacy policy.