The compact power supply unit is compatible with all devices in the myDatalogEASY IoT family. This power supply unit is required for direct connection to an external 12…32VDC supply. The built-in backup battery enables the bridging of short-term power failures and, if necessary, the sending of a failure message.
The integrated circuit for protection against interference and fluctuations in the supply voltage makes this power supply unit particularly suitable for use in control cabinets and industrial environments. The backup battery bridges short-term power failures. In addition, an alarm can be triggered in the event of a supply interruption.
With the help of the runtime calculator, you can estimate the autonomous runtime of the application as well as the costs incurred. The actual costs and energy consumption depend on the measurement conditions, such as the reception quality and ambient temperature. Detailed information on the tariffs can be found here.
|Power Supply Unit PSU DC+ with direct supply
|DC protection circuit
|DC protection circuit with power failure buffer
|12 ... 32 VDC
|Charging voltage (max.)
|Discharge current (max.)
|-20°C ... +60°C
|0°C ... 40°C
|0°C ... 35°C
|Fact Sheet PSU DC+
|3D View PSU DC
|from Hw 1.0
|General usage instructions Batteries and rechargeable batteries
|EU Declaration of ConformityPSU Charger
|from Hw 1.1
|EU Declaration of Conformity
|Guideline for transport Batteries and rechargeable batteries
|Safety data sheet for rechargeable li-ion / li-po cells
|Safety data sheet for primary LiSOCl2 cells
Tell us about your application.
We will be happy to assemble the device according to your requirements.