Rung mounting kit consisting of mounting bracket and mounting flange

The mounting set consists of the mounting bracket for the radar sensor and the mounting flange for bar mounting; The swivel arm is available in a length of 140 mm or 390 mm. Depending on the selected length, the distance between the flange and the centre of the sensor holder is 250 mm or 500 mm. The stainless steel mounting bracket is designed so that the sensor can be optimally aligned. The swivel arm allows the sensor to be positioned above the level to be measured. The precise alignment of the sensor is then carried out via a ball joint.

Technical specifications

Request a quotation

Rung mounting

Connect swivel arm to flange using clamping screw
Position the flange on the rung (15–26 mm) and fasten using wing screws and clamping piece
Optionally lock the swivel arm in place using a safety cotter pin

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

YouTube immer entsperren

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

YouTube immer entsperren

Alignment of the radar sensor

By means of an adapter (optional accessory), a laser distance meter can be attached directly to the sensor holder. The adapter fits either in the 1.5″ receptacle of the sensor (precise alignment of the measuring point) or on an additional receptacle on the bracket (measurement of the mounting height with the sensor already mounted and aligned). The adapter is compatible with the following laser distance meters:

Bosch GLM 30
Bosch GLM 40
Bosch GLM 50 C

Delivery

1x sensor holder consisting of: – Swivel arm depending on choice 140 mm or 390 mm – Sensor holder incl. ball joint – Clamping screws
1x rung mounting flange (plus clamping piece)
1x fixing set (clamping nut and wing bolt)

Note: Depending on the selected length of the swivel arm, the distance between the flange and the centre of the sensor mount is 250 mm or 500 mm.

Product configurator

With the help of the runtime calculator, you can estimate the autonomous runtime of the application as well as the costs incurred. The actual costs and energy consumption depend on the measurement conditions, such as the reception quality and ambient temperature. Detailed information on the tariffs can be found here.