Incredibly flexible: 5 ways to mount the BLE radar sensor

There is a lot going on in the rough environment of a sewer or rain overflow basin. During heavy rainfall events, for example, the water level swells and recedes within a very short time. In order to register the event at all, the measurement intervals must be very short. It is precisely in these situations that the BLE radar sensor shows its strengths.

Table of Contents

The BLE radar sensor is used for non-contact level measurement in harsh environments and provides live data (every 10 seconds) with a battery life of up to 10 years. It convinces by its high measuring accuracy. This accuracy can be guaranteed even in narrow shafts thanks to a low radiation angle of 4°. To avoid parallax during installation, there is a spirit level on the BLE radar sensor.

This makes assembly even easier

The holder of the BLE radar sensor is made of stainless steel. The swivel arm allows the sensor to be aligned over the level to be measured. By means of a ball-and-socket joint, the alignment is subsequently made more precise. In addition, a laser distance meter can be attached directly to the sensor holder.

YouTube

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

The 5 possibilities briefly explained

Wall mounting

Mounting in the duct is done by means of a wall mounting flange (drill and screw).

BLE radar sensor wall mount

Pipe mounting

The BLE radar sensor is mounted by means of a pipe mounting flange suitable for pipe diameters of min. 50 mm up to max. 275 mm.

BLE radar sensor pipe mount

Adhesive mounting

The assembly is carried out by means of an adhesive flange. The substrate should be cleaned with a wire brush before bonding. 2K composite mortar injection material must be used as adhesive.

BLE radar sensor adhesive mount

Rung mounting

The sensor is mounted by means of a rung flange suitable for rung/bar diameters of min. 15 mm up to max. 26 mm.

BLE radar sensor rung mounting

Cross strut mounting

A cross strut suitable for DN 600 manhole covers with pockets for dirt traps is used for installation.

BLE radar sensor cross strut mounting

Everything you need to know about the BLE radar sensor in 15 minutes

Preisträge beim Niederösterreichischen Innovationspreis dem Karl Ritter von Ghega Preis
Blog

Non-contact level measurement wins the “Niederösterreichischer Innovationspreis”

Under the motto “Never again miss an event in the sewer to protect the environment”, Microtronics won the “Niederösterreichischer Innovationspreis” worth 10,000 euros with an innovative measuring system. The award was presented at a ceremony on 24 October in the House of Digitalisation by Governor Johanna Mikl-Leitner and Wolfgang Ecker, President of the Lower Austrian Chamber of Commerce.

myDataconC3+: Konfigurieren und Parametrieren in der Plattform
Applications

For a quick and easy start in the switch cabinet

Record sensor values, optimise energy consumption or monitor dosing pumps: The new software application for the myDatalogC3 switch cabinet controller, the myDataconC3+, makes configuration and parameterisation even easier from now on.

Protokollierung im RÜB
Applications

Logging in the rain overflow basin

Rain overflow basins or combined sewer overflow basins relieve the sewer system during heavy rainfall. If the basin capacity is not sufficient, the partially treated water flows into public waters. The new feature of the platform helps to log data on the water pollution that has occurred in such situations.

In order to use our live chat, you must agree to the loading of Hubspot cookies. You can find out more about this in our privacy policy.