myDatalogC3e 12UI/2Rel

Input extension myDatalogC3e 12UI/2Rel

The myDatalogC3e extension module is used for signal acquisition from 12 universal inputs and for controlling 2 actuators by means of potential-free relay contacts. The extension module has a co-processor. The bus coupling to the myDatalogC3 is done via CAN interface.

Product features

  • Universal inputs for digital and analogue signals
  • Two potential-free switching contacts for direct switching of loads
  • Easy installation thanks to plug-in clamps
  • Compatible with all devices of the myDatalogC3xx family

Features:

  • Interface to C3 with CAN Bus
  • 12x Universal input (mA, V, pulse, frequency)
  • 2x Parallel connection of a relay and an optoswitch
  • Relay outputs with max. 230V AC/DC, 1.5kV rated surge voltage
  • Status LED’s for Bus and I/O’s
  • Top-hat rail housing 70mm width, 4SU

Product configurator

With the help of the runtime calculator, you can estimate the autonomous runtime of the application as well as the costs incurred. The actual costs and energy consumption depend on the measurement conditions, such as the reception quality and ambient temperature. Detailed information on the tariffs can be found here.

Technical data

myDatalogC3e 12UI/2Rel
Item no. 301058
Power supply 9...32VDC (+/-10% )
Power consumption typ. 5W (without sensors)
max. 9W (without sensors)
Housing
  • Material: Lexan/Noryl
  • Weight: 138g
  • Protection class: IP20 / IP40 (connection area / actuation area)
  • Dimensions (WHT): 70 x 92 x 57mm
Operating temperature - 20 ... + 60 °C
Humidity 15 ... 90%rH non-condensing
Storage temperature - 40 ... + 85 °C
Universal inputs 12 x analog or digital
Outputs 2x potential-free switching contact, galvanically isolated

Relay Mode
  • Voltage AC: 230V
  • Voltage DC: 220V
  • Current DC: 2A
  • Current AC: 2A
  • Rated impulse voltage: 1.5kV

Impulse Mode
  • Voltage AC: 230V
  • Voltage DC: 230V
  • Current DC: 0.13A
  • Current AC: 0.13A
  • Rated impulse voltage: 1.5kV
Name Hardware Version Document Category Revision
Fact Sheet myDatalogC3e 12UI/2Rel current Fact Sheet 02
3D View myDatalogC3e 12UI/2Rel from Hw 1.1 3D View Hw 1.1
EU Declaration of Conformity myDatalogC3e xxx from Hw 1.0 EU Declaration of Conformity 18.10.2023
Manual myDatalogC3e 12UI/2Rel from Hw 1.1 Manual 01
Voltage AC Voltage DC Current AC Current DC Rated surge voltage
Relay Mode 230V 220V 2A 2A 1.5kV
Impulse Mode 230V 230V 0.13A 0.13A

Do you want more infos about myDatalogC3e 12UI/2Rel?

Stefan Pfeffer

To load the content, please click on the button. By doing so, you agree to the loading of HubSpot cookies. You can find out more in our privacy policy.

Load content

Request a quote for a device/application

Tell us about your application.
We will be happy to assemble the device according to your requirements.

To load the content, please click on the button. By doing so, you agree to the loading of HubSpot cookies. You can find out more in our privacy policy.

Load content

In order to use our live chat, you must agree to the loading of Hubspot cookies. You can find out more about this in our privacy policy.