Input extension myDatalogC3e 12UI/2Rel

The myDatalogC3e extension module is used for signal acquisition from 12 universal inputs and for controlling 2 actuators by means of potential-free relay contacts. The extension module has a co-processor. The bus coupling to the myDatalogC3 is done via CAN interface.

Product features

Universal inputs for digital and analogue signals
Two potential-free switching contacts for direct switching of loads
Easy installation thanks to plug-in clamps
Compatible with all devices of the myDatalogC3xx family

Technical specifications

Request a quotation

Features:

Interface to C3 with CAN Bus
12x Universal input (mA, V, pulse, frequency)
2x Parallel connection of a relay and an optoswitch
Relay outputs with max. 230V AC/DC, 1.5kV rated surge voltage
Status LED’s for Bus and I/O’s
Top-hat rail housing 70mm width, 4SU

Product configurator

With the help of the runtime calculator, you can estimate the autonomous runtime of the application as well as the costs incurred. The actual costs and energy consumption depend on the measurement conditions, such as the reception quality and ambient temperature. Detailed information on the tariffs can be found here.

Technical data

	myDatalogC3e 12UI/2Rel
Item no.	301058
Power supply	9...32VDC (+/-10% )
Power consumption	typ. 5W (without sensors) max. 9W (without sensors)
Housing	Material: Lexan/Noryl Weight: 138g Protection class: IP20 / IP40 (connection area / actuation area) Dimensions (WHT): 70 x 92 x 57mm
Operating temperature	- 20 ... + 60 °C
Humidity	15 ... 90%rH non-condensing
Storage temperature	- 40 ... + 85 °C
Universal inputs	12 x analog or digital
Outputs	2x potential-free switching contact, galvanically isolated Relay Mode Voltage AC: 230V Voltage DC: 220V Current DC: 2A Current AC: 2A Rated impulse voltage: 1.5kV Impulse Mode Voltage AC: 230V Voltage DC: 230V Current DC: 0.13A Current AC: 0.13A Rated impulse voltage: 1.5kV

Name	Hardware Version	Document Category	Revision
Fact Sheet myDatalogC3e 12UI/2Rel	current	Fact Sheet	03
3D View myDatalogC3e 12UI/2Rel	from Hw 1.1	3D View	Hw 1.1
EU Declaration of Conformity myDatalogC3e xxx	from Hw 1.0	EU Declaration of Conformity	18.10.2023
Manual myDatalogC3e 12UI/2Rel	from Hw 1.1	Manual	02