Radar sensor Vegapuls C21 for myDatalogEASY IoT ATEX with barrier

Non-contact level measurement with the radar sensor Vegapuls C21 in the ATEX zone

The VEGAPULS C21 sensor can only be ordered in combination with a myDatalogEASY IoT ATEX and is ideal for non-contact level measurement in simple applications where a high degree of protection is required. It is particularly suitable for use in water treatment, in pump stations as well as rain overflow basins, for flow measurement in open channels and level monitoring. In bulk materials, the sensors are used in small bulk silos or open containers.

Product features

  • Axial cable outlet
  • Measuring range up to 15 m
  • Accuracy ±2 mm
  • Cable length 5m with plug

 

Scope of delivery:

  • Vegapuls C21 with cable plug 7-polig für myDatalogEx mounted
  • Mounting braket with adjustable sensor holder
  • Measuring channel 1 consisting of:
    • 7-pin Souriau connector (yellow)
    • Potential equalisation
    • Zener barrier 167 installed in myDatalogEASY IoT ATEX

Radar sensor in comparison

  • Non-contact level measurement
  • No cables at the measuring point
  • Measuring range up to 5 m
  • Accuracy ±2 mm
  • ATEX Zone 1

 

To the radar sensor

Product configurator

With the help of the runtime calculator, you can estimate the autonomous runtime of the application as well as the costs incurred. The actual costs and energy consumption depend on the measurement conditions, such as the reception quality and ambient temperature. Detailed information on the tariffs can be found here.

Technical data

Non-contact level measurement with the radar sensor Vegapuls C21 in the ATEX zone
Item no. 301239
Ex certification ATEX/IEC/c-FM-us/c-CSA-us
Gas, intrinsic safety, Zone 0, 0/1, 1, 2 (Class I Division 1, 2)
Dust, intrinsic safety, Zone 20, 20/21, 21, 22 (Class II, III Division 1, 2)
Thread process side/cable side Thread G1½ / G1
Electronics Two-wire 4 ... 20 mA/HART
Sensor connection: 1″ suitable for VEGAPULS C 21
Mounting braket with adjustable sensor holder Sensor connection: 1" suitable for VEGAPULS C 21
Length to sensor centre: 200 mm (7.87 inch)
Cable material / length: PUR / 5m (approx. 16ft)
Name Hardware Version Document Category Revision
Proof of intrinsic safety Radar sensor Vegapuls C21/C22/C23 for myDatalogEASY IoT ATEX from Hw 1.1 Proof of intrinsic safety 01v006

Get a free quote

In order to use our live chat, you must agree to the loading of Hubspot cookies. You can find out more about this in our privacy policy.