The myDatalogGauge measures the pressure and temperature of up to two sensors for fresh, dirty or grey water in ATEX Zone 1 every 10 seconds. The data is transmitted to the central web platform via mobile radio.
When used in venturis and special container geometries, the quantity calculation is determined and alarmed with support point tables on the unit. The commissioning is very simple and possible without a technician.
The myDatalogGauge is characterised by its extremely energy-saving and thus low-maintenance operation. With a transmission interval of at least 24 hours, the maintenance interval is up to 8 years. With the measuring interval of 10 seconds, you react immediately event-based to the over- and undershooting of a defined level. Measurement, recording and transmission intervals are configurable depending on the battery life.
The myDatalog Gauge is certified for use in ATEX Zone 1 hazardous areas. The data is transmitted via mobile radio directly from the ATEX zone to the central web platform.
Parameterisation (setting of offset and trim) is carried out conveniently with the free GaugeBuster app via smartphone directly at the measuring point or alternatively via web platform. GaugeBuster is available for iOS and Android.
The central web platform offers graphical representations of the historical and current measured values. In addition, automatic reporting (daily, weekly, monthly, yearly) can be set up and sent as a PDF by e-mail.
Alerting
The trigger functionality triggers a warning or alarm when the defined threshold value is exceeded or undershot, regardless of the transmission interval. In addition, the recording mode can be automatically adjusted and alarm conditions can be measured and recorded more frequently. No additional hardware such as a float switch is required for this.
UTK – EcoSens GmbH Zeitz
In the area around Zeitz, the groundwater level is kept at a defined level with pumps. The myDatalogGauge records the groundwater level and displays the measured values on the online platform. When the threshold value is exceeded, an alarm is sent to the administration by e-mail and SMS.
Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren
Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren
Fontano
In tunnel construction, the groundwater level must be constantly monitored and lowered in a controlled manner to allow the tunnel to be driven. cell GmbH has installed a monitoring system with automated pump control and monitoring.
GaugeBuster
With the GaugeBuster App you can conveniently read out the current measured values (level and temperature) at the site. Swipe to switch between all sensors within your reach. The GaugeBuster communicates with your smartphone via BLE. You can synchronise the data to the server via the GSM connection of your smartphone. Depending on the frequency of visits to the measuring point, your measured values are thus available on the server worldwide. GaugeBuster is available for Android and iOS.
With the help of the runtime calculator, you can estimate the autonomous runtime of the application as well as the costs incurred. The actual costs and energy consumption depend on the measurement conditions, such as the reception quality and ambient temperature. Detailed information on the tariffs can be found here.
| myDatalogGauge | |
|---|---|
| Item no. | 300866 BLE ATEX 301267 LTE-M ATEX |
| Ex certification | Zone 1 ( |
| Power supply | Battery |
| Battery life time | BLE Gauge: up to 8 years (depending on measurement interval) |
| Data memory | Internal flash memory for up to 36,152 measuring cycles |
| Dimensions | Gateway: 106 x 169 x 61mm (with protective armour) BLE Gauge / Pressure Probe: 40 x 100mm / 21 x 74mm |
| Protection class | Gateway: IP66 / IP68 / IP69 (IP68: max. immersion depth 1m for max. 5h ) BLE Gauge (incl. pressure probe): IP67 |
| Operating temperature | -20...+50°C |
| Cable length |
|
| Display | 1.5" Full Color Display, resolution 128 x 128 |
| Number of sensors | Up to 2 BLE Gauge pressure probes |
| Measurment Range |
|
| Resolution |
|
| Measurement method | Piezoresistive pressure sensor for fresh, waste and grey water |
| Temperature sensor | Measuring range: -20...+50°C Resolution: 0.05°C The compensation of temperature-related influences on the level measurement is only carried out in the range of 0...50°C. |
| Data transmission |
|
| SIM | integrated SIM chip |
| Positioning | by using GSM cell location |
| Name | Hardware Version | Document Category | Revision | |
|---|---|---|---|---|
| Fact Sheet myDatalogGauge 3G Zone 1 | from Hw 3.0 | Fact Sheet | 01 | |
| Manual myDatalogGauge 3G Zone 1 | from Hw 3.0 | Manual | 02 | |
| EU Type Examination Certificate BLE Gauge Zone 1 | from Hw 2.0 | EU Type Examination Certificate | 21.11.2019 | |
| EU Declaration of Conformity BLE Gauge Zone 1 | from Hw 2.0 | EU Declaration of Conformity | 18.01.2021 | |
| EU Type Examination Certificate (BLE Gateway ATEX, BLE & 3G Gateway ATEX) 1st Supplement | from Hw 3.0 | EU Type Examination Certificate | 27.10.2021 | |
| EU Type Examination Certificate (BLE Gateway ATEX, BLE & 3G Gateway ATEX) | from Hw 2.0 | EU Type Examination Certificate | 06.09.2017 | |
| EU Declaration of Conformity BLE & 3G Gateway ATEX Zone 1 | from Hw 3.0 | EU Declaration of Conformity | 11.11.2021 | |
| EU Declaration of Conformity BLE Gateway ATEX Zone 1 | from Hw 3.0 | EU Declaration of Conformity | 11.11.2021 | |
| 3D View BLE & LTE-M Gateway | from Hw 1.0 | 3D View | Hw 1.0 |
| Producttitel | myDatalogGauge |
|---|---|
| Artikelnummer | myDatalogGauge |
| Ex certification | Zone 1 ( |
| Power supply | Battery |
| Battery life time | Gateway: up to 8 years with 10sec. measuring interval; 24h transmission interval (with 3G variant) BLE Gauge: up to 8 years (depending on measurement interval) |
| Data memory | Internal flash memory for up to 36.152 measurement cycles |
| Dimensions | Gateway: 106 x 169 x 61mm (with protective armour) BLE Gauge / pressure sensor: 40 x 100mm / 21 x 74mm |
| Protection class | Gateway: IP66 / IP68 / IP69 (IP68: max. immersion depth 1m for max. 5h ) BLE Gauge (incl. pressure sensor): IP67 |
| Operating temperature | -20...+50°C |
| Cable length |
|
| Display | 1,5" Full Color Display, Resolution 128 x 128 |
| Number of sensors | Up to 2 BLE Gauge pressure sensor |
| Measurment Range |
|
| Resolution |
|
| Measurement method | Piezoresistive pressure sensor for fresh, waste and grey water |
| Temperature sensor | Measurement range: -20...+50°C Resolution: 0,05°C The compensation of the temperature-related influences on the fill level measurement only occurs in the range of 0...50°C . |
| Data transmission | Bluetooth Low Energy (Range up to 20m; depending on conditions) Mobile radio optional:
|
| SIM | integrated SIM chip |
| Positioning | by using GSM cell location |
| Base price | - |
To load the content, please click on the button. By doing so, you agree to the loading of HubSpot cookies. You can find out more in our privacy policy.
Microtronics Engineering GmbH
Hauptstrasse 7
3244 Ruprechtshofen
Austria
Microtronics Engineering GmbH
Hauptstrasse 7
3244 Ruprechtshofen
Austria
Tell us about your application.
We will be happy to assemble the device according to your requirements.
To load the content, please click on the button. By doing so, you agree to the loading of HubSpot cookies. You can find out more in our privacy policy.
In order to use our live chat, you must agree to the loading of Hubspot cookies. You can find out more about this in our privacy policy.
