Request desired device
Fill in the form below and give us a rough idea of your application. We will be happy to provide you with a non-binding quotation.
The combination antenna for mobile radio and WiFi is suitable for all devices of the myDatalogC3 family.
It should be noted that the antenna requires a conductive surface (ground plane dependent). If it is mounted on a plastic housing instead of a metal housing (e.g. switch cabinet), a metal plate measuring at least 30 x 30 cm must be mounted underneath the antenna. There must be an electrical connection to the metal plate via the mounting nut of the antenna.
You can use the runtime calculator to estimate both the autonomous runtime of the application and the associated costs. Actual costs and energy consumption depend on measurement conditions such as reception quality and ambient temperature. You can find detailed information on the tariffs here.
| Combination antenna Cellular (2G/3G)/WiFi with 2 SMA-M plugs and connection cable 3m | |
|---|---|
| Item no. | 300924 |
| Cellular (Cable 1) | Frequency range:
850/900:
1700/1800/1900/2100
Max. Power: 100 W Plug: SMA-M |
| WiFi (Cable 2) | Frequency range:
Gain -0.4 dBi VSWR: ~1.5:1 Max. Power: 25 W Connector: SMA-M |
| Impedance | 50 Ohm |
| Polarisation | Linear |
| Dimension | 100 × 48 × 58 mm |
| Weight | 150 g |
| Cable length | 3 m |
| Protection class | IP67, IP69 |
| Operating temperature | -40°C to +85°C |
| Suitable for | Metal housing, plastic housing (metal plate with 30 x 30 cm required) |
Fill in the form below and give us a rough idea of your application. We will be happy to provide you with a non-binding quotation.
Microtronics Engineering GmbH
Hauptstrasse 7
3244 Ruprechtshofen
Austria
Microtronics Engineering GmbH
Hauptstrasse 7
3244 Ruprechtshofen
Austria
In order to use our live chat, you must agree to the loading of Hubspot cookies. You can find out more about this in our privacy policy.
