Flat antenna Smart Disc 2xFME-F 2m

2G/3G/4G multiband flat antenna with 2 FME-F connectors

The combination antenna for worldwide use, contains 2 mobile radio antennas, each with an FME-F connection. Suitable for myDatalogEasy Iot 2G/3G/4G World, and myDatalogEasy Iot ATEX 2G/3G/4G World.

The antenna requires a conductive surface (ground plane dependent). If it is mounted on a plastic housing instead of a metal housing (e.g. switch cabinet), a metal plate measuring at least 30 x 30 cm must be mounted underneath the antenna. There must be an electrical connection to the metal plate via the mounting nut of the antenna.

Product configurator

You can use the runtime calculator to estimate both the autonomous runtime of the application and the associated costs. Actual costs and energy consumption depend on measurement conditions such as reception quality and ambient temperature. You can find detailed information on the tariffs here.

Technical data

2G/3G/4G multiband flat antenna with 2 FME-F connectors
Item no. 301196
Frequency range 791-960 MHz
1710-2170 MHz
2500-2700 MHz

800/850/900:
  • Gain: ~ -1.1 dBi/-1.9 dBi (Cable 1 / Cable 2)
  • VSWR: ~2,2:1/~2,5:1 (Cable 1 / Cable 2)


1700/1800/1900/2100:
  • Gain: ~ -2,2 dBi/-0,2 dBi (Cable 1 / Cable 2)
  • VSWR: ~1,5:1/~1,7:1 (Cable 1 / Cable 2)


2600:
  • Gain: ~ 0.8 dBi/0.5 dBi (Cable 1 / Cable 2)
  • VSWR: ~1.6:1 (Cable 1 / Cable 2)
Impedance 50 Ohm
Polarisation Linear
Max. Performance 25 W
Connector FME–F
Dimensions DM 146 x 31,5 mm
Mounting type screw mounting
mounting hole Ø 19,5 mm / 15 x 15 mm
Cable length 2 m
Suitable for Metal housing, plastic housing (metal plate with 30 x 30 cm required)
Protection class IP67, IP69K
Impact resistance level IK09
Operating temperature - 40 °C to + 85 °C

Which use case would you like to implement?

You are currently viewing a placeholder content from HubSpot. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.

More Information

In order to use our live chat, you must agree to the loading of Hubspot cookies. You can find out more about this in our privacy policy.