The value generation of Things in the Internet of Things

Table of Contents

On the manufacturer side the value of an IoT application consists of a conventional, not linked to the Internet, product. By using IT, the product is refined and a smart, connected product is created.

This refinement has already been explained in detail in 5 value-creation layers for IoT application. The conventional, physical product is on layer 1 and is refined by layer 2 to 4. On the customer side, the in this way generated value on layer 5 represents the benefit of the physical product and the associated digital service.[1]

5 value-creation layers in IoT
Value-creation layers at an Internet of Things application[3]

The result is more than the sum of the layers based on the product – especially due to the simple and cost-effective possibilities of combining external, digital services with one’s own.[1]

Product service logic in the Internet of Things

A smart, connected product is created by adding IT to a conventional physical thing. The IT consists of hardware and software.

The thing-based function is physical and local. This function is independent of IT. IT-based services will be added to the thing for refinement of the thing with IT. The IT-based services are digital and global and going far beyond the local boundaries of the product.

The product service logic in the Internet of Things[4]

The physical and local benefits of tipping semi-trailers with thermal insulation from SchwarzmĂĽller still transports asphalt, even if it is equipped with a smart, connected measuring system, the Wicell. The additional benefit for the freighter is the automatic logging of the temperature development during the transport. The central storage of the protocol in the cloud is also automatic. This enables the freighter to provide proof o quality to his customer at any time.

The start-up goUrban rents e-mopeds in Vienna. The physical and local benefits remain the driving with an e-moped and the bridging of a distance. The additional IT-based benefit enables renting based on the sharing concept. In addition, fleet management is made possible because goUrban always knows where the e-mopeds are and is informed about critical operating parameters, such as the rechargeable battery state of charge.

Lawn mowing is the physical and local benefit of Viking’s iMow. The smart, connected iMow also features the global, digital benefits of flexible mowing schedules and the convenient configuration of these via a smartphone app. Theft protection is also implemented via GPS tracking.

Reference List

  1. ↑ Fleisch, E., Weinberger, M., & Wortmann, F. (2014, August). Geschäftsmodelle im Internet der Dinge. Bosch IoT Lab White Paper. Abgerufen von White-Paper.pdf
  2. ↑ Fleisch, E., Weinberger, M., & Wortmann, F. (2014, August). Geschäftsmodelle im Internet der Dinge. Bosch IoT Lab White Paper. Abgerufen von White-Paper.pdf, S. 7 – eigene Darstellung
  3. ↑ Fleisch, E., Weinberger, M., & Wortmann, F. (2014, August). Geschäftsmodelle im Internet der Dinge. Bosch IoT Lab White Paper. Abgerufen von White-Paper.pdf, S. 8 – eigene Darstellung mit eigenen Beispielen

Would you like to learn more about Microtronics?

Kanal-Entlastung in den Fluss mit drei Enten
Applications

Implementation of the EU Urban Waste Water Treatment Directive

The EU Urban Waste Water Treatment Directive protects the environment from harmful effects caused by the discharge of urban waste water; The guideline dates back to 1991 and is currently being revised; The planned innovations strengthen environmental protection. At the same time, this is accompanied by stricter requirements for sewer network operators, wastewater treatment plants and manufacturers.

In the following, we summarise the most important key points, show what the implementation of the EU Urban Waste Water Treatment Directive means for combined sewerage systems and provide an insight into the possible technologies that support implementation.

Ăśberlauf bei Starkregen bei einem Kanaldeckel
Applications

Heavy rainfall and effects on sewers: Data logger for heavy rain monitoring

Heavy rainfall events are occurring more frequently worldwide and pose an increasing challenge for wastewater systems. The intensity and frequency of heavy rainfall events are being intensified by climate change, which can lead to overloading of sewers. In this article, we analyse the effects of heavy rainfall on sewers and discuss possible solutions to the problem. In particular, we look at the opportunities and possibilities with data loggers.

bgz
Partner Solutions

bgu

The plausibility monitoring of bgu-Umweltschutzanlagen GmbH is used to check the function of a throttling device.

In order to use our live chat, you must agree to the loading of Hubspot cookies. You can find out more about this in our privacy policy.